SKF Einreihiges Rillenkugellager Kugellager 1-reihig, Innen-Ø 220mm / Außen-Ø 270mm, Breite 24mm

Innendurchmesser = 220mm
Außendurchmesser = 270mm
Axiallager-Breite = 24mm
Kugellager = Einreihiges Rillenkugellager
Dichtungsanordnung = Offene Bauweise
Lagerspiel = CN
Material = Stahl
Kugelmaterial = Stahl
Käfigmaterial = Stahlblech
Anzahl der Reihen = 1
Statische Traglast = 110kN
Dynamische Traglast = 78kN
Bohrung Typ = Parallel
Lager-Serie = 1 Extra leichtes Drucklager
Teillagercode = 61844

SKF Ball Bearing, 220 mm ID, 270 mm OD - 61844 This single-row ball bearing from SKF is a deep-groove type that can handle high loads while maintaining stability. Its low friction operation reduces surface wear and tear, minimising the risk of machine failure. The bearings deep grooves cut down on vibration and noise for a smooth and quiet operating function. A unit like this one is ideal for high rotational speeds and can accommodate radial loads that are perpendicular to the shaft.• Open end, cylindrical bore type • Deep-groove design for low friction torque • Low noise and vibration • Inside diameter of 220 mm • Outside diameter of 270 mm • Race width of 24 mm Application Information • Mining and mineral processing industries • Agricultural equipment manufacturing • Aerospace industryDie SKF-Axial-Kugellager werden als ein- oder zweifach-Axial-Kugellager hergestellt. Sie sind nur für axiale Lasten ausgelegt und dürfen keiner radialen Belastung ausgesetzt werden. Er hat einen Innendurchmesser von 220 mm und einen Außendurchmesser von 270 mm. Can I replace a traditional bearing with a deep-groove ball bearing? Das Lager besteht aus Lagerstahl Zylindrische BohrungDeep-groove ball bearings are easy to install and will fit into a traditional bearing housing. This makes it simple to replace traditional bearings with deep-groove ball bearings. Do I have to lubricate this bearing? This ball bearing from SKF is an open-end type. Adding appropriate lubrication will extend its lifetime